Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.
Applies to
HP Chromebook G1m 11 inch. Confirm the exact model on the service label before starting.
HP Chromebook G1m 11 inch bottom cover replacement. HP prints this procedure on printed page 33 of its maintenance and service guide.
Tools and parts
- Screwdrivers and a non-marking pry tool as HP lists for this procedure
- Static-safe work surface
P26433-001- Bottom cover. Source: printed page 32.
Preparation
Save your work and shut the computer down through the operating system, unplug AC power and every external device, and work on a clean, grounded, ESD-protected surface while sorting each screw by its original location. Handle every cable by its connector and put each one back in its own place during reassembly.
Replacement
- Position the computer upside down carefully with the front toward you. (printed page 33).
- Take out the five Phillips M2.0 × 6.0 screws that hold the bottom cover to the computer. (printed page 33).
- Loosen the captive Phillips screw until the cover pops up. (printed page 33).
- Insert a tool into the seam outside the right hinge (printed page 33).
- Take off the cover (3). (printed page 33).
Part numbers in our catalog
- HP bottom cover P26433-001 (P26433-001)
- HP bottom cover P34055-001 (P34055-001)
Check each part page for its source and variant notes before ordering.
Manufacturer manual
HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-chromebook-g1m-11-inch-bottom-cover-replacement-p33