Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.
Applies to
HP Chromebook G1m 11 inch. Confirm the exact model on the service label before starting.
HP Chromebook G1m 11 inch heat sink replacement. HP prints this procedure on printed page 35 of its maintenance and service guide.
Tools and parts
- Screwdrivers and a non-marking pry tool as HP lists for this procedure
- Static-safe work surface
P26429-001- Heat sink. Source: printed page 35.P26428-001- Thermal pad. Source: printed page 35.
Preparation
Save your work and shut the computer down through the operating system, unplug AC power and every external device, and work on a clean, grounded, ESD-protected surface while sorting each screw by its original location. Handle every cable by its connector and put each one back in its own place during reassembly.
Replacement
- Take out the two Phillips M2.0 × 2.5 screws from the heat sink. (printed page 35).
- Take out the heat sink (2). (printed page 36).
- Each time the heat sink is removed (printed page 36).
Parts this procedure uses
- HP Thermal pad P26428-001 (P26428-001)
Part numbers in our catalog
- HP heat sink P26429-001 (P26429-001)
Check each part page for its source and variant notes before ordering.
Manufacturer manual
HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-chromebook-g1m-11-inch-heat-sink-replacement-p35