Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.
Applies to
HP Chromebook G1m 11 inch. Confirm the exact model on the service label before starting.
HP Chromebook G1m 11 inch wlan module replacement. HP prints this procedure on printed page 34 of its maintenance and service guide.
Tools and parts
- Screwdrivers and a non-marking pry tool as HP lists for this procedure
- Static-safe work surface
P24069-001- MediaTek MT7921 Wi-Fi 6 + Bluetooth 5.3. Source: printed page 34.
Preparation
Save your work and shut the computer down through the operating system, unplug AC power and every external device, and work on a clean, grounded, ESD-protected surface while sorting each screw by its original location. Handle every cable by its connector and put each one back in its own place during reassembly.
Replacement
- Take out the plastic antenna protector from the module. (printed page 34).
- Detach the antenna cables from the module terminals. (printed page 34).
- Take out the Phillips M2.0 × 3.0 screw that holds from the WLAN module. (printed page 34).
- Take out the module by pulling it away off the slot at an angle. (printed page 34).
- if the wlan antenna has no connection to the terminal on the wlan module, fit a protective (printed page 35).
Parts this procedure uses
- HP Motherboard P24069-001 (P24069-001)
Manufacturer manual
HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-chromebook-g1m-11-inch-wlan-module-replacement-p34