Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.
Applies to
HP Chromebook x360 11 G3 Education Edition. Confirm the exact model on the service label before starting.
HP Chromebook x360 11 G3 Education Edition display assembly replacement. HP prints this procedure on printed page 46. The spare-part table for this part is on printed page 46.
Tools and parts
- Flat-bladed screwdriver, Magnetic screwdriver and Phillips P0 and P1 screwdrivers
- Static-safe work surface
Preparation
HP prints its tools list and its handling and electrostatic-discharge cautions on printed page 19. Work on a grounded, static-safe surface, keep screws grouped by the position they came from, and handle boards and modules by their edges.
Replacement
- Detach the webcam module cable from the system board. (printed page 46).
- Take out the Phillips M2.0×2.9 screw that holds the WLAN module (printed page 46).
- Take out the WLAN bracket (3). (printed page 46).
- Detach the WLAN antenna cables from the terminals on the WLAN module. (printed page 46).
- Let go of the shielding that covers the display panel cable connector. (printed page 46).
- Let go of the adhesive strip that holds the display panel cable to the system board. (printed page 46).
Part numbers in our catalog
- HP touch panel assembly with digitizer (L92338-001)
- HP touch panel assembly without digitizer (L92337-001)
Check each part page for its source and variant notes before ordering.
Manufacturer manual
HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-chromebook-x360-11-g3-education-edition-display-assembly-replacement-p46