HP EliteBook 850 G4 system board replacement

Step-by-step HP EliteBook 850 G4 system board replacement rewritten in our own words from HP's Maintenance and Service Guide, with page citations.

Part you need917507-xx1HP System board, Intel i7-7600U processor 917507-xx1 for the HP EliteBook 850 G4
View part & buy links
On this page
  1. Applies to
  2. Tools and parts
  3. Preparation
  4. Replacement
  5. Part numbers in our catalog
  6. Manufacturer manual
Source: steps rewritten in our own words (no more than 8 words in a row copied; part numbers, screw sizes and warnings kept as printed) from HP's Maintenance and Service Guide (PDF, printed pages 66–68). Not bench-tested. We have not performed this repair; keep HP's manual open for its illustrations. Scope restrictions below are part of the guide: do not apply it to other models, generations or configurations. Service manuals are written for trained technicians; work at your own risk.

Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.

Applies to

HP EliteBook 850 G4. Confirm the exact model on the service label before starting.

HP EliteBook 850 G4 Notebook PC system board replacement. HP prints this procedure on printed page 66 of its maintenance and service guide.

Tools and parts

  • Screwdrivers and a non-marking pry tool as HP lists for this procedure
  • Static-safe work surface

Preparation

Save your work and shut the computer down through the operating system, unplug AC power and every external device, and work on a clean, grounded, ESD-protected surface while sorting each screw by its original location. Handle every cable by its connector and put each one back in its own place during reassembly.

Replacement

  1. Position the computer upright (printed page 66).
  2. Detach the card reader cable and the fingerprint reader cable from the system board by lifting (printed page 66).
  3. Close the computer and position it upside down. (printed page 66).
  4. Detach the following cables from the system board: (printed page 67).
  5. Take out the 2 Phillips M2.5×5.0 screws that hold the system board to the computer. (printed page 67).
  6. Lift the right side of the main board up at an angle (2). (printed page 67).
  7. Pull the main board towards the right to disengage the connectors away from the left side of the machine, and after that take the main board (3). (printed page 68).
  8. Fit the replacement part by working back through the printed removal steps (printed page 68).

Part numbers in our catalog

Check each part page for its source and variant notes before ordering.

Manufacturer manual

HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-elitebook-850-g4-system-board-replacement-p66

Key facts

HP document part number
913341-001
Model
HP EliteBook 850 G4
Release year
2016
Screen size
15.6"
Printed pages
66–68