HP EliteBook x360 830 G8 card reader board replacement

Step-by-step HP EliteBook x360 830 G8 card reader board replacement rewritten in our own words from HP's Maintenance and Service Guide, with page citations.

Part you needM03883-001HP card reader board for the HP EliteBook x360 830 G8
View part & buy links
On this page
  1. Applies to
  2. tools and parts
  3. preparation
  4. replacement
  5. Parts this procedure uses
  6. Manufacturer manual
Source: steps rewritten in our own words (no more than 8 words in a row copied; part numbers, screw sizes and warnings kept as printed) from HP's Maintenance and Service Guide (PDF, printed pages 32–56). Not bench-tested. We have not performed this repair; keep HP's manual open for its illustrations. Scope restrictions below are part of the guide: do not apply it to other models, generations or configurations. Service manuals are written for trained technicians; work at your own risk.

Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.

Applies to

HP EliteBook x360 830 G8. Confirm the exact model on the service label before starting.

HP EliteBook x360 830 G8 Notebook PC card reader board replacement. HP prints this procedure on printed page 55 of its maintenance and service guide, and the spare-part table for this part is on printed page 55.

tools and parts

  • Screwdrivers and a non-marking pry tool as HP lists for this procedure
  • Static-safe work surface
  • M03883-001 - Card reader board. Source: printed page 55.
  • M46068-001 - Card reader insert (included in Plastics Kit). Source: printed page 55.
  • M03867-001 - Card reader board cable (included in Cable Kit). Source: printed page 55.

preparation

Save your work and shut the computer down through the operating system, unplug AC power and every external device, and work on a clean, grounded, ESD-protected surface while sorting each screw by its original location. Handle every cable by its connector and put each one back in its own place during reassembly.

  1. Get the machine ready for taking apart (the Preparation for disassembly section is on page 30). (printed page 32).
  2. Take the bottom cover off (the Bottom cover section is on page 30). (printed page 32).
  3. Take the battery out (the Battery section is on page 38). (printed page 43).

replacement

  1. Take the left speaker (the Speakers section is on page 54). (printed page 55).
  2. Take the main board (the main board section is on page 51). (printed page 55).
  3. Take the three Phillips M2.0 × 2.0 fasteners (1) that hold the card reader to the machine. (printed page 55).
  4. Raise the upper of the board upward to about a 45° angle (2). (printed page 55).
  5. Draw the card reader out from under the WWAN aerial holder to lift it out from the machine (3). (printed page 56).
  6. Fit the replacement part by working back through the printed removal steps (printed page 56).

Parts this procedure uses

Manufacturer manual

HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-elitebook-x360-830-g8-card-reader-board-replacement-p55

Key facts

HP document part number
M17156-002
Model
HP EliteBook x360 830 G8
Release year
2021
Screen size
13.3"
Printed pages
32–56

Related