Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.
Applies to
HP EliteBook x360 830 G8. Confirm the exact model on the service label before starting.
HP EliteBook x360 830 G8 Notebook PC power connector cable replacement. HP prints this procedure on printed page 42 of its maintenance and service guide, and the spare-part table for this part is on printed page 42.
tools and parts
- Screwdrivers and a non-marking pry tool as HP lists for this procedure
- Static-safe work surface
M03867-001- Power connector cable (included in the Cable Kit). Source: printed page 42.
preparation
Save your work and shut the computer down through the operating system, unplug AC power and every external device, and work on a clean, grounded, ESD-protected surface while sorting each screw by its original location. Handle every cable by its connector and put each one back in its own place during reassembly.
- Get the machine ready for taking apart (the Preparation for disassembly section is on page 30). (printed page 32).
- Take the bottom cover off (the Bottom cover section is on page 30). (printed page 32).
- Detach the battery lead from the main board (the Battery section is on page 38). (printed page 32).
replacement
- Detach the lead from the main board (1), and after that take the lead from the clip. (printed page 42).
- Undo the Phillips M2.0 × 4.0 fastener (2) that holds the power connector lead to the machine. (printed page 42).
- Take the power connector lead from the machine (3). (printed page 43).
- Fit the replacement part by working back through the printed removal steps (printed page 43).
Part numbers in our catalog
Check each part page for its source and variant notes before ordering.
Manufacturer manual
HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-elitebook-x360-830-g8-power-connector-cable-replacement-p42