HP EliteBook x360 830 G8 fingerprint reader board replacement

Step-by-step HP EliteBook x360 830 G8 fingerprint reader board replacement rewritten in our own words from HP's Maintenance and Service Guide, with page citations.

Part you needM46068-001HP System board bracket (available in Plastics Kit) M46068-001 for the HP EliteBook x360 830 G8
View part & buy links
On this page
  1. Applies to
  2. tools and parts
  3. preparation
  4. replacement
  5. Parts this procedure uses
  6. Part numbers in our catalog
  7. Manufacturer manual
Source: steps rewritten in our own words (no more than 8 words in a row copied; part numbers, screw sizes and warnings kept as printed) from HP's Maintenance and Service Guide (PDF, printed pages 32–44). Not bench-tested. We have not performed this repair; keep HP's manual open for its illustrations. Scope restrictions below are part of the guide: do not apply it to other models, generations or configurations. Service manuals are written for trained technicians; work at your own risk.

Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.

Applies to

HP EliteBook x360 830 G8. Confirm the exact model on the service label before starting.

HP EliteBook x360 830 G8 fingerprint reader board replacement. HP prints this procedure on printed page 43 of its maintenance and service guide.

tools and parts

  • Screwdrivers and a non-marking pry tool as HP lists for this procedure
  • Static-safe work surface
  • M36397-001 - Fingerprint reader board. Source: printed page 43.
  • M46068-001 - Fingerprint reader insert (included in Plastics Kit). Source: printed page 43.
  • M03867-001 - Fingerprint reader board cable (included in Cable Kit). Source: printed page 43.
  • M46057-001 - Fingerprint reader board bracket (included in Bracket Kit). Source: printed page 43.

preparation

Save your work and shut the computer down through the operating system, unplug AC power and every external device, and work on a clean, grounded, ESD-protected surface while sorting each screw by its original location. Handle every cable by its connector and put each one back in its own place during reassembly.

  1. Get the machine ready for taking apart (the Preparation for disassembly section is on page 30). (printed page 32).
  2. Take the bottom cover off (the Bottom cover section is on page 30). (printed page 32).

replacement

  1. Take the battery out (the Battery section is on page 38). (printed page 43).
  2. Detach the lead out of the ZIF connector on the fingerprint board (1). (printed page 43).
  3. Undo the Phillips M2.0 × 2.0 fastener (2) that holds the fingerprint reader bracket to the machine, and after that take the bracket (3). (printed page 43).
  4. Take the fingerprint reader board from the machine (4). (printed page 44).
  5. Fit the replacement part by working back through the printed removal steps (printed page 44).

Parts this procedure uses

Part numbers in our catalog

Check each part page for its source and variant notes before ordering.

Manufacturer manual

HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-elitebook-x360-830-g8-fingerprint-reader-board-replacement-p43

Key facts

HP document part number
M17156-002
Model
HP EliteBook x360 830 G8
Release year
2021
Screen size
13.3"
Printed pages
32–44

Related