Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.
Applies to
HP EliteBook x360 830 G8. Confirm the exact model on the service label before starting.
HP EliteBook x360 830 G8 Notebook PC display assembly replacement. HP prints this procedure on printed page 41 of its maintenance and service guide, and the spare-part table for this part is on printed page 17.
tools and parts
- Tweezers, Nonconductive, nonmarking pry tool and Magnetic Phillips P1 drivers
- Static-safe work surface
M46060-001- Display assembly, 1000 nits, antiglare, privacy, WWAN. Source: printed page 40.M46065-001- Display assembly, 1000 nits, antiglare, privacy, no WWAN. Source: printed page 40.M46064-001- Display assembly, 1000 nits, BrightView, privacy, WWAN. Source: printed page 40.M46061-001- Display assembly, 1000 nits, BrightView, privacy, no WWAN. Source: printed page 40.M46066-001- Display assembly, 400 nits, antiglare, WWAN. Source: printed page 40.M46063-001- Display assembly, 400 nits, antiglare, no WWAN. Source: printed page 40.M46062-001- Display assembly, 400 nits, BrightView, WWAN. Source: printed page 40.M46067-001- Display assembly, 400 nits, BrightView, no WWAN. Source: printed page 40.M46058-001- Display assembly, 250 nits, BrightView, no WWAN. Source: printed page 41.M46059-001- Display assembly, 250 nits, BrightView, WWAN. Source: printed page 41.
preparation
HP prints its tools list and its handling and electrostatic-discharge cautions on printed page 23. Its preparation for disassembly is on printed page 30: power the unit down through the operating system, unplug the power cord and detach every external device before opening it. Work on a grounded, static-safe surface, keep screws grouped by the position they came from, and handle boards and modules by their edges.
replacement
- Detach the display cable from the system board and the antenna cables from the WWAN module. (printed page 41).
- Detach left display cable from system board and antenna cables from WLAN module, and then remove cables off the clips along the side of the fan. (printed page 41).
- Take out the six Phillips M2.5 × 5.0 screws that hold the display assembly to the computer. (printed page 41).
- Rotate the display to open the hinges (2). (printed page 41).
- Separate the display assembly from the computer (3). (printed page 42).
- Put the display assembly back by repeating the printed removal moves in the opposite order (printed page 42).
Part numbers in our catalog
- HP 13.3-inch display assembly (1000 nit antiglare privacy WWAN) (M46060-001)
- HP 13.3-inch display assembly (1000 nit antiglare privacy, no WWAN) (M46065-001)
- HP 13.3-inch display assembly (1000 nit BrightView privacy WWAN) (M46064-001)
- HP 13.3-inch display assembly (1000 nit BrightView privacy, no WWAN) (M46061-001)
- HP 13.3-inch display assembly (400 nit antiglare WWAN) (M46066-001)
- HP 13.3-inch display assembly (400 nit antiglare, no WWAN) (M46063-001)
- HP 13.3-inch display assembly (400 nit BrightView WWAN) (M46062-001)
- HP 13.3-inch display assembly (400 nit BrightView, no WWAN) (M46067-001)
- HP 13.3-inch display assembly (250 nit BrightView, no WWAN) (M46058-001)
- HP 13.3-inch display assembly (250 nit BrightView WWAN) (M46059-001)
Check each part page for its source and variant notes before ordering.
Manufacturer manual
HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-elitebook-x360-830-g8-display-assembly-replacement-p41