Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.
Applies to
HP Fortis Flip G1m 11 inch Chromebook. Confirm the exact model on the service label before starting.
HP Fortis Flip G1m 11 inch Chromebook bottom cover replacement. HP prints this procedure on printed page 34 of its maintenance and service guide.
Tools and parts
- Screwdrivers and a non-marking pry tool as HP lists for this procedure
- Static-safe work surface
P22942-001- fHDMI. Source: printed page 33.P23340-001- nHDMI. Source: printed page 33.
Preparation
Save your work and shut the computer down through the operating system, unplug AC power and every external device, and work on a clean, grounded, ESD-protected surface while sorting each screw by its original location. Handle every cable by its connector and put each one back in its own place during reassembly.
Replacement
- Place the machine upside down with the front toward you. (printed page 34).
- Take the two Phillips M2.0 × 10.0 fasteners (1). (printed page 34).
- Back off the two captive Phillips fasteners (2). (printed page 34).
- Take the two Phillips M2.0 × 5.0 fasteners (3). (printed page 34).
- Split the top edge of the base cover (1) away from the machine. (printed page 34).
- Take the bottom cover off (2). (printed page 34).
Part numbers in our catalog
- HP bottom cover P22942-001 (P22942-001)
- HP bottom cover P23340-001 (P23340-001)
Check each part page for its source and variant notes before ordering.
Manufacturer manual
HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-fortis-flip-g1m-11-inch-chromebook-bottom-cover-replacement-p34