Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.
Applies to
HP Fortis Flip G1m 11 inch Chromebook. Confirm the exact model on the service label before starting.
HP Fortis Flip G1m 11 inch Chromebook pen charging module replacement. HP prints this procedure on printed page 43 of its maintenance and service guide, and the spare-part table for this part is on printed page 13.
Tools and parts
- Screwdrivers and a non-marking pry tool as HP lists for this procedure
- Static-safe work surface
P23315-001- Pen charging module. Source: printed page 43.
Preparation
Save your work and shut the computer down through the operating system, unplug AC power and every external device, and work on a clean, grounded, ESD-protected surface while sorting each screw by its original location. Handle every cable by its connector and put each one back in its own place during reassembly.
Replacement
- Get the machine ready for taking apart (the Preparation for disassembly section is on page 26). (printed page 35).
- Take the bottom cover off (the Bottom cover section is on page 33). (printed page 27).
- Take the battery out (the Removing and reinstalling the same battery section is on page 27). (printed page 35).
- Take the plastic cover (1) from the main board connector for the unit. The cover is secured with adhesive. (printed page 43).
- Detach the lead (2) from the main board. (printed page 43).
- Take the three Phillips M1.6 × 2.5 fasteners (3) from the unit. (printed page 43).
- Take the unit (4) from the machine. (printed page 43).
Manufacturer manual
HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-fortis-flip-g1m-11-inch-chromebook-pen-charging-module-replacement-p43