Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.
Applies to
HP Fortis Flip G1m 11 inch Chromebook. Confirm the exact model on the service label before starting.
HP Fortis Flip G1m 11 inch Chromebook second camera replacement. HP prints this procedure on printed page 36 of its maintenance and service guide, and the spare-part table for this part is on printed page 12.
Tools and parts
- Screwdrivers and a non-marking pry tool as HP lists for this procedure
- Static-safe work surface
P22929-001- Second camera. Source: printed page 36.
Preparation
Save your work and shut the computer down through the operating system, unplug AC power and every external device, and work on a clean, grounded, ESD-protected surface while sorting each screw by its original location. Handle every cable by its connector and put each one back in its own place during reassembly.
Replacement
- Get the machine ready for taking apart (the Preparation for disassembly section is on page 26). (printed page 35).
- Take the bottom cover off (the Bottom cover section is on page 33). (printed page 27).
- Take the battery out (the Removing and reinstalling the same battery section is on page 27). (printed page 35).
- Take the two Phillips M2.0 × 3.5 fasteners (1) from the camera bracket. (printed page 36).
- Take the bracket (2). (printed page 36).
- Take the Phillips M2.0 × 3.5 fastener (1) from the board. (printed page 36).
- Turn the board upside down (2), and after that detach the lead out of the reverse ZIF connector (3) at the bottom of the board. (printed page 37).
Manufacturer manual
HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-fortis-flip-g1m-11-inch-chromebook-second-camera-replacement-p36