Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.
Applies to
HP Fortis x360 11 inch G5 Chromebook. Confirm the exact model on the service label before starting.
Fortis x360 11 inch G5 Chromebook™ pen charger replacement. HP prints this procedure on printed page 38 of its maintenance and service guide, and the spare-part table for this part is on printed page 38.
tools and parts
- Nonconductive, nonmarking pry tool and Magnetic Phillips P2 drivers
- Static-safe work surface
N85027-001- Pen charger (in the Cable Kit). Source: printed page 38.
preparation
HP prints its tools list and its handling and electrostatic-discharge cautions on printed page 19. Its preparation for disassembly is on printed page 28: power the unit down through the operating system, unplug the power cord and detach every external device before opening it. Work on a grounded, static-safe surface, keep screws grouped by the position they came from, and handle boards and modules by their edges.
replacement
- Peel tape off pen charger system board connector. The tape may stay on the system board. (printed page 38).
- Detach the cable from the system board ZIF connector. (printed page 38).
- Take out the three Phillips M1.6 × 4.0 screws from the charger. (printed page 38).
- Take out the charger from the computer. (printed page 39).
Parts this procedure uses
Manufacturer manual
HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-fortis-x360-11-inch-g5-chromebook-pen-charger-replacement-p38