HP EliteBook 1040 G9 Memory modules replacement

Step-by-step HP EliteBook 1040 G9 Memory modules replacement rewritten in our own words from HP's Maintenance and Service Guide, with page citations.

Part you needN09030-001HP part number . The fingerprint reader cable is included in th N09030-001 for the HP EliteBook 1040 G9
View part & buy links
On this page
  1. Applies to
  2. tools and parts
  3. preparation
  4. replacement
  5. Parts this procedure uses
  6. Part numbers in our catalog
  7. Manufacturer manual
Source: steps rewritten in our own words (no more than 8 words in a row copied; part numbers, screw sizes and warnings kept as printed) from HP's Maintenance and Service Guide (PDF, printed pages 51). Not bench-tested. We have not performed this repair; keep HP's manual open for its illustrations. Scope restrictions below are part of the guide: do not apply it to other models, generations or configurations. Service manuals are written for trained technicians; work at your own risk.

Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.

Applies to

HP EliteBook 1040 G9. Confirm the exact model on the service label before starting.

HP EliteBook 1040 14 inch G9 Notebook PC memory modules replacement. HP prints this procedure on printed page 51 of its maintenance and service guide, and the spare-part table for this part is on printed page 51.

tools and parts

  • Tweezers
  • Nonconductive, nonmarking pry tool
  • Magnetic Phillips P1 screwdriver
  • N05331-001 - 32 GB (SODIMM, DDR5-4800, 1.1v, NECC). Source: printed page 51.
  • M97596-001 - 16 GB (SODIMM, DDR5-4800, 1.1v, NECC). Source: printed page 51.
  • M97595-001 - 8 GB (SODIMM, DDR5-4800, 1.1v, NECC). Source: printed page 51.
  • N09030-001 - Memory module shield (included in the Bracket Kit). Source: printed page 51.

preparation

Save your work, shut the computer down through the operating system, unplug AC power and every external device, and work on a clean, grounded, ESD-protected surface while sorting each screw by its original location. Handle every cable by its connector and put each one back in its own place during reassembly.

  1. Get the machine ready for teardown (that section sits on page 44).
  2. Take the bottom cover off (that section sits on page 44).
  3. Unplug the battery lead from the main board (the Battery section sits on page 46).

replacement

  1. Take the memory module shield away.
  2. Spread the two retention clips outward (1) so the module tips up at a 45° angle, and pull the module (2) out.

Parts this procedure uses

Part numbers in our catalog

Check each part page for its source and variant notes before ordering.

Manufacturer manual

HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-elitebook-1040-14-inch-g9-memory-modules-replacement

Key facts

HP document part number
N09568-002
Model
HP EliteBook 1040 G9
Release year
2022
Screen size
14"
Printed pages
51

Related