HP EliteBook 1040 G9 NFC module replacement

Step-by-step HP EliteBook 1040 G9 NFC module replacement rewritten in our own words from HP's Maintenance and Service Guide, with page citations.

Part you needM08706-001HP NFC module M08706-001 for the HP EliteBook 1040 G9
View part & buy links
On this page
  1. Applies to
  2. Tools and parts
  3. Preparation
  4. Replacement
  5. Parts this procedure uses
  6. Manufacturer manual
Source: steps rewritten in our own words (no more than 8 words in a row copied; part numbers, screw sizes and warnings kept as printed) from HP's Maintenance and Service Guide (PDF, printed pages 46–72). Not bench-tested. We have not performed this repair; keep HP's manual open for its illustrations. Scope restrictions below are part of the guide: do not apply it to other models, generations or configurations. Service manuals are written for trained technicians; work at your own risk.

Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.

Applies to

HP EliteBook 1040 G9. Confirm the exact model on the service label before starting.

HP EliteBook 1040 14 inch G9 Notebook PC NFC module replacement. HP prints this procedure on printed page 71 of its maintenance and service guide, and the spare-part table for this part is on printed page 24.

Tools and parts

  • Screwdrivers and a non-marking pry tool as HP lists for this procedure
  • Static-safe work surface
  • M08706-001 - NFC module. Source: printed page 71.

Preparation

Save your work and shut the computer down through the operating system, unplug AC power and every external device, and work on a clean, grounded, ESD-protected surface while sorting each screw by its original location. Handle every cable by its connector and put each one back in its own place during reassembly.

Replacement

  1. Get the machine ready for taking apart (the Preparation for disassembly section is on page 44). (printed page 46).
  2. Take the bottom cover off (the Bottom cover section is on page 44). (printed page 47).
  3. Take the battery out (the Battery section is on page 46). (printed page 63).
  4. Take the NFC module lead (the NFC module lead section is on page 70). (printed page 71).
  5. Free the ZIF connector (1) that carries the NFC module lead is connected, and after that detach the NFC module lead from the NFC module. (printed page 71).
  6. Detach the NFC unit (2) out of the upper cover/keyboard. (The NFC unit is attached to the upper cover/keyboard with double-sided adhesive.) (printed page 72).
  7. Take the NFC module. (printed page 72).
  8. Fit the replacement part by working back through the printed removal steps (printed page 72).

Parts this procedure uses

Manufacturer manual

HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-elitebook-1040-14-inch-g9-nfc-module-replacement-p71

Key facts

HP document part number
N09568-002
Model
HP EliteBook 1040 G9
Release year
2022
Screen size
14"
Printed pages
46–72

Related