HP EliteBook 1040 G9 WLAN module replacement

Step-by-step HP EliteBook 1040 G9 WLAN module replacement rewritten in our own words from HP's Maintenance and Service Guide, with page citations.

Part you needM52040-001HP WWAN module (Intel XMM 7560 R + LTE-Advanced Pro, Cat 16) for the HP EliteBook 1040 G9
View part & buy links
On this page
  1. Applies to
  2. Tools and parts
  3. Preparation
  4. Replacement
  5. Part numbers in our catalog
  6. Manufacturer manual
Source: steps rewritten in our own words (no more than 8 words in a row copied; part numbers, screw sizes and warnings kept as printed) from HP's Maintenance and Service Guide (PDF, printed pages 46–50). Not bench-tested. We have not performed this repair; keep HP's manual open for its illustrations. Scope restrictions below are part of the guide: do not apply it to other models, generations or configurations. Service manuals are written for trained technicians; work at your own risk.

Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.

Applies to

HP EliteBook 1040 G9. Confirm the exact model on the service label before starting.

HP EliteBook 1040 14 inch G9 Notebook PC WLAN module replacement. HP prints this procedure on printed page 49 of its maintenance and service guide, and the spare-part table for this part is on printed page 25.

Tools and parts

  • Screwdrivers and a non-marking pry tool as HP lists for this procedure
  • Static-safe work surface
  • M53366-001 - Intel AX211 Wi-Fi 6e + Bluetooth 5.2 M.2 2230 160 MHz CNVi WW WLAN module. Source: printed page 49.
  • M53362-001 - Intel AX211 Wi-Fi 6e + Bluetooth 5.2 M.2 2230 vPro 160 MHz CNVi WW WLAN module. Source: printed page 49.

Preparation

Save your work and shut the computer down through the operating system, unplug AC power and every external device, and work on a clean, grounded, ESD-protected surface while sorting each screw by its original location. Handle every cable by its connector and put each one back in its own place during reassembly.

Replacement

  1. Get the machine ready for taking apart (the Preparation for disassembly section is on page 44). (printed page 46).
  2. Take the bottom cover off (the Bottom cover section is on page 44). (printed page 47).
  3. Detach the battery lead from the main board (the Battery section is on page 46). (printed page 48).
  4. Gently detach the WLAN module aerial leads from the WLAN module (1). (printed page 49).
  5. Undo the Phillips M2.0 × 2.5 fastener (2), and after that take the WLAN module out (3). (printed page 49).
  6. If the WLAN module aerial is not connected to the terminal at the WLAN module, fit a protective sleeve on the aerial connector, as shown in the following illustration. (printed page 50).
  7. Fit the replacement part by working back through the printed removal steps (printed page 50).

Part numbers in our catalog

Check each part page for its source and variant notes before ordering.

Manufacturer manual

HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-elitebook-1040-14-inch-g9-wlan-module-replacement-p49

Key facts

HP document part number
N09568-002
Model
HP EliteBook 1040 G9
Release year
2022
Screen size
14"
Printed pages
46–50