Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.
Applies to
HP EliteBook 1040 G9. Confirm the exact model on the service label before starting.
HP EliteBook 1040 14 inch G9 Notebook PC fingerprint reader replacement. HP prints this procedure on printed page 67 of its maintenance and service guide.
Tools and parts
- Screwdrivers and a non-marking pry tool as HP lists for this procedure
- Static-safe work surface
N08532-001- Fingerprint reader. Source: printed page 67.
Preparation
Save your work, shut the computer down through the operating system, unplug AC power and every external device, and work on a grounded, static-safe surface.
Replacement
- Open the case and remove the battery and right speaker. (printed page 67).
- Undo the screw that holds the reader and bracket. (printed page 67).
- Take the bracket off the reader. (printed page 67).
- Release the ZIF connector and pull the cable free. (printed page 67).
- Lift the fingerprint reader out of the chassis. (printed page 67).
Part numbers in our catalog
- HP fingerprint reader (N08532-001)
Check each part page for its source and variant notes before ordering.
Manufacturer manual
HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-elitebook-1040-14-inch-g9-notebook-pc-fingerprint-reader-replacement-p67