HP EliteBook 640 G11 system board replacement

Step-by-step HP EliteBook 640 G11 system board replacement rewritten in our own words from HP's Maintenance and Service Guide, with page citations.

Part you needN96552-xx1HP Motherboard N96552-xx1 for the HP EliteBook 640 G11
View part & buy links
On this page
  1. Applies to
  2. Tools and parts
  3. Preparation
  4. Replacement
  5. Part numbers in our catalog
  6. Manufacturer manual
Source: steps rewritten in our own words (no more than 8 words in a row copied; part numbers, screw sizes and warnings kept as printed) from HP's Maintenance and Service Guide (PDF, printed pages 65–89). Not bench-tested. We have not performed this repair; keep HP's manual open for its illustrations. Scope restrictions below are part of the guide: do not apply it to other models, generations or configurations. Service manuals are written for trained technicians; work at your own risk.

Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.

Applies to

HP EliteBook 640 G11. Confirm the exact model on the service label before starting.

HP EliteBook 640 14 inch G11 Notebook PC system board replacement. HP prints this procedure on printed page 87 of its maintenance and service guide.

Tools and parts

  • Screwdrivers and a non-marking pry tool as HP lists for this procedure
  • Static-safe work surface

Preparation

Save your work and shut the computer down through the operating system, unplug AC power and every external device, and work on a clean, grounded, ESD-protected surface while sorting each screw by its original location. Handle every cable by its connector and put each one back in its own place during reassembly.

Replacement

  1. Detach the following cables from the system board: (printed page 87).
  2. Take out the three Phillips M2.0 × 1.8 screws (1). (printed page 88).
  3. Take out the three Phillips M2.0 × 4.0 screws (2). (printed page 88).
  4. Take out the plastic I/O bracket from the right edge of the board. (printed page 88).
  5. Lift the side of the system board upward, and then pull the system board away off the (printed page 89).
  6. Get the computer ready for disassembly (see that procedure on page 62). (printed page 65).
  7. Take off the bottom cover (see that procedure on page 62). (printed page 65).
  8. Detach the battery cable from the system board (see that procedure on page 74). (printed page 65).

Part numbers in our catalog

Check each part page for its source and variant notes before ordering.

Manufacturer manual

HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-elitebook-640-14-inch-g11-system-board-replacement-p87

Key facts

HP document part number
N81610-001
Model
HP EliteBook 640 G11
Release year
2024
Screen size
14"
Printed pages
65–89

Related