HP EliteBook 640 G11 display assembly replacement

Step-by-step HP EliteBook 640 G11 display assembly replacement rewritten in our own words from HP's Maintenance and Service Guide, with page citations.

Part you needP06010-001HP 14-inch WUXGA 300 nit touch display panel for the HP EliteBook 640 G11
View part & buy links
On this page
  1. Applies to
  2. Tools and parts
  3. Preparation
  4. Replacement
  5. Part numbers in our catalog
  6. Manufacturer manual
Source: steps rewritten in our own words (no more than 8 words in a row copied; part numbers, screw sizes and warnings kept as printed) from HP's Maintenance and Service Guide (PDF, printed pages 89–95). Not bench-tested. We have not performed this repair; keep HP's manual open for its illustrations. Scope restrictions below are part of the guide: do not apply it to other models, generations or configurations. Service manuals are written for trained technicians; work at your own risk.

Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.

Applies to

HP EliteBook 640 G11. Confirm the exact model on the service label before starting.

HP EliteBook 640 14 inch G11 Notebook PC display assembly replacement. HP prints this procedure on printed page 89 of its maintenance and service guide.

Tools and parts

  • Screwdrivers and a non-marking pry tool as HP lists for this procedure
  • Static-safe work surface

Preparation

Save your work and shut the computer down through the operating system, unplug AC power and every external device, and work on a clean, grounded, ESD-protected surface while sorting each screw by its original location. Handle every cable by its connector and put each one back in its own place during reassembly.

Replacement

  1. (Select models only) Detach the antenna cables from the WWAN module. (printed page 89).
  2. (Choose models only) Detach the WWAN lead from the main board connector (2). (printed page 89).
  3. (Select models only) Take out the WWAN cable (printed page 89).
  4. Detach the antenna cables from the WLAN module. (printed page 89).
  5. Detach the display cable from carefully the system board ZIF connector. (printed page 89).
  6. Take out the display cable (printed page 90).
  7. Take out the six Phillips M2.5 × 4.0 screws that hold the display assembly to the computer. (printed page 90).
  8. Open the computer to approximately 170° (printed page 90).
  9. Separate the display assembly from the computer. (printed page 90).
  10. To remove the bezel: (printed page 91).
  11. To remove the display panel: (printed page 91).
  12. To remove an IR camera module: (printed page 92).
  13. To remove an FHD camera module: (printed page 93).
  14. To remove the ambient light sensor (ALS): (printed page 93).
  15. To remove the hinges from the display enclosure: (printed page 94).
  16. To remove the display panel/camera lead on models with an IR camera: (printed page 94).
  17. To remove the display panel/camera lead on models with an FHD camera: (printed page 95).
  18. To remove the wireless antennas and cables: (printed page 95).

Part numbers in our catalog

Check each part page for its source and variant notes before ordering.

Manufacturer manual

HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-elitebook-640-14-inch-g11-display-assembly-replacement-p89

Key facts

HP document part number
N81610-001
Model
HP EliteBook 640 G11
Release year
2024
Screen size
14"
Printed pages
89–95

Related