Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.
Applies to
HP ProBook 440 G6. Confirm the exact model on the service label before starting.
HP ProBook 440 G6 Notebook PC hard drive replacement. HP prints this procedure on printed page 45 of its maintenance and service guide.
Tools and parts
- Screwdrivers and a non-marking pry tool as HP lists for this procedure
- Static-safe work surface
762990-001- Hard drive, 1 TB, 5400 rpm, 7 mm. Source: printed page 45.703267-001- Hard drive, 500 GB, 7200 rpm, 7 mm. Source: printed page 45.L44510-001- Hard Drive Hardware Kit (includes hard drive cover and connector). Source: printed page 45.
Preparation
Save your work and shut the computer down through the operating system, unplug AC power and every external device, and work on a clean, grounded, ESD-protected surface while sorting each screw by its original location. Handle every cable by its connector and put each one back in its own place during reassembly.
Replacement
- Let go of the ZIF connector (1) (printed page 45).
- Take out the two Phillips M2.0×4.0 screws that hold the hard drive to the computer. (printed page 45).
- Employ the tab to raise the hard drive from the bay (4). (printed page 45).
- To disassemble the hard drive (printed page 46).
Part numbers in our catalog
- HP 1 TB 5400 rpm 7 mm hard drive 762990-001 (762990-001)
- HP 500 GB 7200 rpm 7 mm hard drive 703267-001 (703267-001)
- HP Hard drive hardware kit with cover and connector L44510-001 (L44510-001)
Check each part page for its source and variant notes before ordering.
Manufacturer manual
HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-probook-440-g6-hard-drive-replacement-p45