Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.
Applies to
HP ProBook 440 G6. Confirm the exact model on the service label before starting.
HP ProBook 440 G6 Notebook PC touchpad assembly replacement. HP prints this procedure on printed page 55 of its maintenance and service guide.
Tools and parts
- Screwdrivers and a non-marking pry tool as HP lists for this procedure
- Static-safe work surface
L44580-001- TouchPad assembly (includes cable). Source: printed page 55.
Preparation
Save your work and shut the computer down through the operating system, unplug AC power and every external device, and work on a clean, grounded, ESD-protected surface while sorting each screw by its original location. Handle every cable by its connector and put each one back in its own place during reassembly.
Replacement
- Detach the lead from the ZIF connector on the TouchPad (1). (printed page 55).
- Lift the lead to lift it out from the adhesive that holds it to the TouchPad (2). (printed page 55).
- Lift the silver tape from the TouchPad (3). (printed page 55).
- Take out the six broad head Phillips M2.0×2.0 screws that hold the TouchPad to the computer. (printed page 55).
- Lift the TouchPad out of the computer (5). (printed page 55).
- Fit the replacement part by working back through the printed removal steps (printed page 55).
Part numbers in our catalog
- HP touchpad L44580-001 (L44580-001)
Check each part page for its source and variant notes before ordering.
Manufacturer manual
HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-probook-440-g6-touchpad-assembly-replacement-p55