Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.
Applies to
HP ProBook 440 G6. Confirm the exact model on the service label before starting.
HP ProBook 440 G6 Notebook PC heat sink replacement. HP prints this procedure on printed page 51 of its maintenance and service guide.
Tools and parts
- Screwdrivers and a non-marking pry tool as HP lists for this procedure
- Static-safe work surface
L44553-001- Heat sink for use in models with discrete graphics. Source: printed page 51.L44552-001- Heat sink for use in models with UMA graphics. Source: printed page 51.
Preparation
Save your work and shut the computer down through the operating system, unplug AC power and every external device, and work on a clean, grounded, ESD-protected surface while sorting each screw by its original location. Handle every cable by its connector and put each one back in its own place during reassembly.
Replacement
- To remove the cooler on models with discrete graphics memory: (printed page 51).
- To remove the cooler on models with UMA graphics memory: (printed page 52).
- Fit the replacement part by working back through the printed removal steps (printed page 53).
Part numbers in our catalog
- HP heat sink L44552-001 (L44552-001)
- HP Heat sink for NVIDIA GeForce MX130 discrete graphics models L44553-001 (L44553-001)
Check each part page for its source and variant notes before ordering.
Manufacturer manual
HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-probook-440-g6-heat-sink-replacement-p51