Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.
Applies to
HP ProBook 470 G4. Confirm the exact model on the service label before starting.
HP ProBook 470 G4 Notebook PC power cable replacement. HP prints this procedure on printed page 83 of its maintenance and service guide.
Tools and parts
- Screwdrivers and a non-marking pry tool as HP lists for this procedure
- Static-safe work surface
828949-007- Power connector and cable. Source: printed page 83.
Preparation
Save your work and shut the computer down through the operating system, unplug AC power and every external device, and work on a clean, grounded, ESD-protected surface while sorting each screw by its original location. Handle every cable by its connector and put each one back in its own place during reassembly.
Replacement
- Lift the cable off the clips in the computer (1). (printed page 83).
- Take out the power cable from the computer (2). (printed page 83).
- Fit the replacement part by working back through the printed removal steps (printed page 83).
Part numbers in our catalog
- HP power connector cable (828949-007)
- HP cable kit (USB board, TouchPad, power button board, optical drive, function board cables) (906000-001)
Check each part page for its source and variant notes before ordering.
Manufacturer manual
HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-probook-470-g4-power-cable-replacement-p83