Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.
Applies to
HP ProBook 470 G4. Confirm the exact model on the service label before starting.
HP ProBook 470 G4 Notebook PC service door replacement. HP prints this procedure on printed page 31 of its maintenance and service guide.
Tools and parts
- Screwdrivers and a non-marking pry tool as HP lists for this procedure
- Static-safe work surface
906002-001- Service door. Source: printed page 31.
Preparation
Save your work and shut the computer down through the operating system, unplug AC power and every external device, and work on a clean, grounded, ESD-protected surface while sorting each screw by its original location. Handle every cable by its connector and put each one back in its own place during reassembly.
Replacement
- Loosen the captive Phillips screw (1). (printed page 31).
- Lift the bottom of the door upward (2) (printed page 31).
- Power the machine down. (printed page 31).
- Place the computer in “cell Safe mode” (Battery Safe mode on page 30). (printed page 31).
- Detach all external devices connected to the computer. (printed page 31).
- Cut the power by pulling the cord out of the wall outlet, and after that unplugging the AC adapter from the machine. (printed page 31).
- Take out the service door (see that procedure on page 31). (printed page 32).
Part numbers in our catalog
- HP bottom cover 905995-001 (905995-001)
Check each part page for its source and variant notes before ordering.
Manufacturer manual
HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-probook-470-g4-service-door-replacement-p31