Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.
Applies to
HP ProBook 470 G4. Confirm the exact model on the service label before starting.
HP ProBook 470 G4 Notebook PC rtc battery replacement. HP prints this procedure on printed page 73 of its maintenance and service guide.
Tools and parts
- Screwdrivers and a non-marking pry tool as HP lists for this procedure
- Static-safe work surface
- Intel Core i7-7500U processor; 2-GB discrete graphics memory - HP prints no single spare part number for this option, so no part number is published (printed page 16).
- Intel Core i5-7200U processor; 2-GB discrete graphics memory - HP prints no single spare part number for this option, so no part number is published (printed page 16).
- Intel Core i3-7100U processor; 2-GB discrete graphics memory - HP prints no single spare part number for this option, so no part number is published (printed page 16).
Preparation
Save your work and shut the computer down through the operating system, unplug AC power and every external device, and work on a clean, grounded, ESD-protected surface while sorting each screw by its original location. Handle every cable by its connector and put each one back in its own place during reassembly.
Replacement
- Position the system board upside-down. (printed page 73).
- Employ a tool to lever the battery out of the socket (1). (printed page 73).
- Lift the battery off the system board (2). (printed page 73).
- Fit the replacement part by working back through the printed removal steps (printed page 73).
Manufacturer manual
HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-probook-470-g4-rtc-battery-replacement-p73