Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.
Applies to
HP ZBook 17 G3. Confirm the exact model on the service label before starting.
HP ZBook 17 G3 service door and rear cover replacement. HP prints this procedure on printed page 37 of its maintenance and service guide.
tools and parts
- Flat-bladed screw driver, Magnetic screw driver and Phillips P0 and P1 screw drivers
- Static-safe work surface
- No spare part number for this component was found in the cached manual
906112-001- Service door and rear cover for use in federal models. Source: printed page 37.
preparation
HP prints its tools list and its handling and electrostatic-discharge cautions on printed page 30. Work on a grounded, static-safe surface, keep screws grouped by the position they came from, and handle boards and modules by their edges.
replacement
- Set the computer on its face on a flat surface. (printed page 37).
- Slide release latch to left to unlock the service door (1). (printed page 37).
- Slide service door away from the bottom of the notebook (2). (printed page 37).
- Loosen the 14 Torx captive screws to release the rear cover. (printed page 37).
- Lift the rear cover off the computer (2). (printed page 38).
- Put the service door and rear cover back by repeating the printed removal moves in the opposite order (printed page 38).
Part numbers in our catalog
- HP bottom cover 906112-001 (906112-001)
- HP Service door for standard models 848345-001 (848345-001)
- HP Service door 906121-001 (906121-001)
Check each part page for its source and variant notes before ordering.
Manufacturer manual
HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-zbook-17-g3-service-door-and-rear-cover-replacement-p37