Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.
Applies to
HP ZBook 17 G3. Confirm the exact model on the service label before starting.
HP ZBook 17 G3 Mobile Workstation service door replacement. HP prints the spare part table for this procedure on printed page 36.
Tools and parts
- Flat-bladed screw driver, Magnetic screw driver and Phillips P0 and P1 screw drivers
- Static-safe work surface
848345-001- Service door for use in standard models. Source: printed page 36.
Preparation
HP prints its tools list and its handling and electrostatic-discharge cautions on printed page 30. Work on a grounded, static-safe surface, keep screws grouped by the position they came from, and handle boards and modules by their edges.
Replacement
- Power the machine down. (printed page 36).
- Detach the power from the notebook by unplugging the power cord from the computer. (printed page 36).
- Detach all external devices from the computer. (printed page 36).
- Set the computer on its face on a flat surface. (printed page 36).
- Loosen the 11 Torx captive screws to release the service door. (printed page 36).
- Take out the service door (2). (printed page 36).
- Install the service door by working back through the printed removal steps (printed page 36).
Part numbers in our catalog
- HP bottom cover 906112-001 (906112-001)
- HP Service door for standard models 848345-001 (848345-001)
- HP Service door 906121-001 (906121-001)
Check each part page for its source and variant notes before ordering.
Manufacturer manual
HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-zbook-17-g3-service-door-replacement-p36