Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.
Applies to
HP ZBook Firefly 14 G11. Confirm the exact model on the service label before starting.
HP ZBook Firefly 14 G11 fingerprint reader board replacement. HP prints this procedure on printed page 49 of its maintenance and service guide.
Tools and parts
- Screwdrivers and a non-marking pry tool as HP lists for this procedure
- Static-safe work surface
N09257-001- Fingerprint reader board. Source: printed page 49.N09040-001- Fingerprint reader board cable (included in Cable Kit). Source: printed page 49.N09031-001- Fingerprint reader insert (for use in models without a fingerprint reader) (included in the Plastic Kit). Source: printed page 49.N94626-001- Fingerprint read bracket (included in the Bracket Kit). Source: printed page 49.
Preparation
Save your work, shut the computer down through the operating system, unplug AC power and every external device, and work on a grounded, static-safe surface.
Replacement
- Prepare the computer for disassembly and remove the bottom cover. (printed page 49).
- Take the battery out and move the speaker on that side. (printed page 49).
- Open the ZIF socket, undo the bracket screw and lift the reader board free. (printed page 49).
Parts this procedure uses
- HP Cable Kit N09040-001 (N09040-001)
- HP Plastics Kit N09031-001 (N09031-001)
- HP USB board metal bracket and SIM tray N94626-001 (N94626-001)
Part numbers in our catalog
- HP fingerprint reader (N09257-001)
Check each part page for its source and variant notes before ordering.
Manufacturer manual
HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-zbook-firefly-14-g11-fingerprint-reader-board-replacement-p49