Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.
Applies to
HP Elite x360 830 G9. Confirm the exact model on the service label before starting.
HP Elite x360 830 G9 Notebook PC audio jack module replacement. HP prints this procedure on printed page 52 of its maintenance and service guide, and the spare-part table for this part is on printed page 52.
Tools and parts
- Screwdrivers and a non-marking pry tool as HP lists for this procedure
- Static-safe work surface
N11993-001- Audio jack module. Source: printed page 52.
Preparation
Save your work and shut the computer down through the operating system, unplug AC power and every external device, and work on a clean, grounded, ESD-protected surface while sorting each screw by its original location. Handle every cable by its connector and put each one back in its own place during reassembly.
Replacement
- Detach the audio jack module lead from the main board (1). (printed page 52).
- Undo the Phillips M2.0 × 4.0 fastener (2) that holds the audio jack module to the machine. (printed page 52).
- Take the audio jack module from the machine (3). (printed page 53).
- Fit the replacement part by working back through the printed removal steps (printed page 53).
Parts this procedure uses
- HP Audio jack (includes cable) N11993-001 (N11993-001)
Manufacturer manual
HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-elite-x360-830-g9-audio-jack-module-replacement-p52