HP Elite x360 830 G9 system board replacement

Step-by-step HP Elite x360 830 G9 system board replacement rewritten in our own words from HP's Maintenance and Service Guide, with page citations.

Part you needN03420-xx1HP System board, Intel Core i7-1265U, 8 GB (OSR) N03420-xx1 for the HP Elite x360 830 G9
View part & buy links
On this page
  1. Applies to
  2. Tools and parts
  3. Preparation
  4. Replacement
  5. Part numbers in our catalog
  6. Manufacturer manual
Source: steps rewritten in our own words (no more than 8 words in a row copied; part numbers, screw sizes and warnings kept as printed) from HP's Maintenance and Service Guide (PDF, printed pages 39–59). Not bench-tested. We have not performed this repair; keep HP's manual open for its illustrations. Scope restrictions below are part of the guide: do not apply it to other models, generations or configurations. Service manuals are written for trained technicians; work at your own risk.

Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.

Applies to

HP Elite x360 830 G9. Confirm the exact model on the service label before starting.

HP Elite x360 830 G9 Notebook PC system board replacement. HP prints this procedure on printed page 57 of its maintenance and service guide.

Tools and parts

  • Screwdrivers and a non-marking pry tool as HP lists for this procedure
  • Static-safe work surface

Preparation

Save your work and shut the computer down through the operating system, unplug AC power and every external device, and work on a clean, grounded, ESD-protected surface while sorting each screw by its original location. Handle every cable by its connector and put each one back in its own place during reassembly.

Replacement

  1. Get the machine ready for taking apart (the Preparation for disassembly section is on page 37). (printed page 39).
  2. Take the bottom cover off (see Bottom cover on page 37). (printed page 57).
  3. Take the battery out (the Battery section is on page 38). (printed page 40).
  4. Detach those leads from the main board: (printed page 57).
  5. Take the four Phillips M2.0 × 5.0 fasteners (1)and take the plastic right bracket (2). (printed page 58).
  6. Take the Phillips M2.0 × 4.0 fastener (1) and the Phillips M1.6 × 4.0 fastener (1) that hold the main board to the machine. (printed page 59).
  7. Take the SIM card seat from the machine (1). (printed page 59).
  8. Lift the side of the main board upward (2), and after that pull the main board away out of the connectors on the side of the machine to lift it out (3). (printed page 59).
  9. Fit the replacement part by working back through the printed removal steps (printed page 59).

Part numbers in our catalog

Check each part page for its source and variant notes before ordering.

Manufacturer manual

HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-elite-x360-830-g9-system-board-replacement-p57

Key facts

HP document part number
N09338-001
Model
HP Elite x360 830 G9
Release year
2022
Screen size
13.3"
Printed pages
39–59

Related