Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.
Applies to
HP Elite x360 830 G9. Confirm the exact model on the service label before starting.
HP Elite x360 830 G9 Notebook PC display assembly replacement. HP prints this procedure on printed page 46 of its maintenance and service guide, and the spare-part table for this part is on printed page 23.
tools and parts
- Tweezers, Nonconductive, nonmarking pry tool and Magnetic Phillips P1 drivers
- Static-safe work surface
N02888-001- Display assembly, 250 nits, Widescreen Ultra Extended Graphics Array (WUXGA), no WWAN. Source: printed page 45.N02889-001- Display assembly, 1000 nits, WUXGA, IR, antiglare, WWAN. Source: printed page 45.N02890-001- Display assembly, 1000 nits, WUXGA, IR, antiglare, no WWAN. Source: printed page 45.N02891-001- Display assembly, 400 nits, WUXGA, IR, antiglare, WWAN. Source: printed page 46.N02892-001- Display assembly, 400 nits, WUXGA, IR, antiglare, no WWAN. Source: printed page 46.N02893-001- Display assembly, 1000 nits, WUXGA, BrightView, IR, WWAN. Source: printed page 46.N02894-001- Display assembly, 1000 nits, WUXGA, BrightView, IR, no WWAN. Source: printed page 46.N02895-001- Display assembly, 400 nits, WUXGA, BrightView, IR, WWAN. Source: printed page 46.N02896-001- Display assembly, 400 nits, WUXGA, BrightView, IR, no WWAN. Source: printed page 46.
preparation
HP prints its tools list and its handling and electrostatic-discharge cautions on printed page 28. Its preparation for disassembly is on printed page 37: power the unit down through the operating system, unplug the power cord and detach every external device before opening it. Work on a grounded, static-safe surface, keep screws grouped by the position they came from, and handle boards and modules by their edges.
replacement
- Detach camera cable and disconnect antenna cables from the WLAN module. (printed page 46).
- Detach display cable (3), and disconnect antenna cables from the WWAN module (4). (printed page 46).
- Lift cables off clips along the side of the right speaker (printed page 46).
- Take out the seven Phillips M2.5 × 5.0 screws that hold the display assembly to the computer. (printed page 46).
- Rotate the display upward to open the hinges. (printed page 46).
- Separate the display assembly from the computer (3). (printed page 47).
- Put the display assembly back by repeating the printed removal moves in the opposite order (printed page 47).
Part numbers in our catalog
- HP 13.3-inch display assembly (250 nit WUXGA, no WWAN) (N02888-001)
- HP 13.3-inch display assembly (1000 nit WUXGA IR antiglare WWAN) (N02889-001)
- HP 13.3-inch display assembly (1000 nit WUXGA IR antiglare, no WWAN) (N02890-001)
- HP 13.3-inch display assembly (400 nit WUXGA IR antiglare WWAN) (N02891-001)
- HP 13.3-inch display assembly (400 nit WUXGA IR antiglare, no WWAN) (N02892-001)
- HP 13.3-inch display assembly (1000 nit WUXGA BrightView IR WWAN) (N02893-001)
- HP 13.3-inch display assembly (1000 nit WUXGA BrightView IR, no WWAN) (N02894-001)
- HP 13.3-inch display assembly (400 nit WUXGA BrightView IR WWAN) (N02895-001)
- HP 13.3-inch display assembly (400 nit WUXGA BrightView IR, no WWAN) (N02896-001)
- HP 13.3-inch display assembly (250 nit WUXGA BrightView RGB WWAN) (N02887-001)
Check each part page for its source and variant notes before ordering.
Manufacturer manual
HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-elite-x360-830-g9-display-assembly-replacement-p46