Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.
Applies to
HP Elite x360 830 G9. Confirm the exact model on the service label before starting.
HP Elite x360 830 G9 Notebook PC touchpad replacement. HP prints this procedure on printed page 49 of its maintenance and service guide, and the spare-part table for this part is on printed page 23.
Tools and parts
- Screwdrivers and a non-marking pry tool as HP lists for this procedure
- Static-safe work surface
N02328-001- Touchpad. Source: printed page 49.
Preparation
Save your work and shut the computer down through the operating system, unplug AC power and every external device, and work on a clean, grounded, ESD-protected surface while sorting each screw by its original location. Handle every cable by its connector and put each one back in its own place during reassembly.
Replacement
- Get the machine ready for taking apart (the Preparation for disassembly section is on page 37). (printed page 39).
- Take the bottom cover off (the Bottom cover section is on page 37). (printed page 39).
- Take the battery out (the Battery section is on page 38). (printed page 40).
- Detach the touchpad lead (1), and after that detach the NFC lead (2). (printed page 49).
- Take the seven Phillips M1.6 × 1.8 fasteners (1) that hold the touchpad to the machine. (printed page 49).
- Take the touchpad from the machine (2). (printed page 50).
- Fit the replacement part by working back through the printed removal steps (printed page 50).
Part numbers in our catalog
- HP touchpad (N02328-001)
Check each part page for its source and variant notes before ordering.
Manufacturer manual
HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-elite-x360-830-g9-touchpad-replacement-p49