Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.
Applies to
HP Elite x360 830 G9. Confirm the exact model on the service label before starting.
HP Elite x360 830 G9 Notebook PC bottom cover replacement. HP prints this procedure on printed page 38 of its maintenance and service guide, and the spare-part table for this part is on printed page 37.
Tools and parts
- Screwdrivers and a non-marking pry tool as HP lists for this procedure
- Static-safe work surface
N02326-001- Bottom cover for use in models without WWAN. Source: printed page 37.N02327-001- Bottom cover for use in models with WWAN. Source: printed page 37.
Preparation
Save your work and shut the computer down through the operating system, unplug AC power and every external device, and work on a clean, grounded, ESD-protected surface while sorting each screw by its original location. Handle every cable by its connector and put each one back in its own place during reassembly.
Replacement
- Back off the three captive Phillips M2.5 × 9.0 fasteners (1) and the two captive Phillips M2.5 × 6.0 fasteners that hold the bottom cover to the machine (2). (printed page 38).
- Use a nonmarking, nonconductive tool to free the edges of the bottom cover from the machine (1). (printed page 38).
- Take the bottom cover off from the machine (2). (printed page 38).
Part numbers in our catalog
- HP bottom cover (models with WLAN) (N02326-001)
- HP bottom cover (models with WWAN) (N02327-001)
Check each part page for its source and variant notes before ordering.
Manufacturer manual
HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-elite-x360-830-g9-bottom-cover-replacement-p38