Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.
Applies to
HP Elite x360 830 G9. Confirm the exact model on the service label before starting.
HP Elite x360 830 G9 Notebook PC solid-state drive replacement. HP prints this procedure on printed page 44 of its maintenance and service guide.
Tools and parts
- Screwdrivers and a non-marking pry tool as HP lists for this procedure
- Static-safe work surface
M52027-002- 2 TB, PCIe-4 × 4, TLC. Source: printed page 44.M16560-002- 1 TB, PCIe-4 × 4 NVMe,TLC. Source: printed page 44.M52031-002- 512 GB, PCIe-4 × 4, self-encrypting drive (SED). Source: printed page 44.L85364-002- 512 GB, PCIe, value. Source: printed page 44.M17436-002- 512 GB, PCIe-4 × 4, NVMe TLC. Source: printed page 44.L85354-002- 256 GB, PCIe, NVMe, value. Source: printed page 44.M52025-002- 256 GB, PCIe-4 × 4, TLC. Source: printed page 44.M52029-002- 256 GB, PCIe-4 × 4, TLC, SED. Source: printed page 44.N02333-001- Thermal pad. Source: printed page 44.
Preparation
Save your work and shut the computer down through the operating system, unplug AC power and every external device, and work on a clean, grounded, ESD-protected surface while sorting each screw by its original location. Handle every cable by its connector and put each one back in its own place during reassembly.
Replacement
- Get the machine ready for taking apart (the Preparation for disassembly section is on page 37). (printed page 39).
- Take the bottom cover off (the Bottom cover section is on page 37). (printed page 39).
- Take the battery out (the Battery section is on page 38). (printed page 40).
- Undo the Phillips M2.0 × 2.5 fastener (1) that holds the drive to the machine. (printed page 44).
- Draw the drive out of the socket to take it away (2). (printed page 44).
- Power the machine down. If you cannot tell whether the machine is off or in Hibernation, turn the machine on, and after that shut it down through the operating system. (printed page 37).
- Cut the power from the machine by unplugging the power cord from the machine. (printed page 37).
- Detach every external device from the machine. (printed page 37).
Parts this procedure uses
- HP Thermal pad N02333-001 (N02333-001)
Part numbers in our catalog
- HP SSD L85354-002 (L85354-002)
- HP SSD M17436-002 (M17436-002)
- HP SSD L85364-002 (L85364-002)
- HP SSD M52025-002 (M52025-002)
- HP Solid-state drive, 2 TB, PCIe-4 × 4, TLC M52027-002 (M52027-002)
- HP Solid-state drive, 1 TB, PCIe-4 × 4 NVMe, TLC M16560-002 (M16560-002)
- HP Solid-state drive, 512 GB, PCIe-4 × 4, self-encrypting drive M52031-002 (M52031-002)
- HP Solid-state drive, 256 GB, PCIe-4 × 4, TLC, SED M52029-002 (M52029-002)
Check each part page for its source and variant notes before ordering.
Manufacturer manual
HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-elite-x360-830-g9-solid-state-drive-replacement-p44