Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.
Applies to
HP EliteBook 820 G2. Confirm the exact model on the service label before starting.
HP EliteBook 820 G2 Notebook PC and heat sink replacement. HP prints this procedure on printed page 72 of its maintenance and service guide, and the spare-part table for this part is on printed page 72.
tools and parts
- Flat-bladed screw driver, Magnetic screw driver and Phillips P0 screw driver
- Static-safe work surface
730556-001- Heat sink. Source: printed page 72.
preparation
HP prints its tools list and its handling and electrostatic-discharge cautions on printed page 32. Work on a grounded, static-safe surface, keep screws grouped by the position they came from, and handle boards and modules by their edges.
- Turn top cover upside down with the front towards you. (printed page 68).
replacement
- Detach the heat sink shroud from the fan. (printed page 72).
- Following 1 through 4 sequence stamped into heat sink, loosen the four Phillips captive screws hold the heat sink to the system board. (printed page 72).
- Take out the heat sink (3). (printed page 73).
- Put the heat sink back by repeating the printed removal moves in the opposite order (printed page 73).
Part numbers in our catalog
- HP heat sink 730556-001 (730556-001)
Check each part page for its source and variant notes before ordering.
Manufacturer manual
HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-elitebook-820-g2-notebook-pc-and-heat-sink-replacement-p72