Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.
Applies to
HP EliteBook 830 G5. Confirm the exact model on the service label before starting.
HP EliteBook 830 G5 Notebook PC heat sink assembly replacement. HP prints this procedure on printed page 54 of its maintenance and service guide.
Tools and parts
- Screwdrivers and a non-marking pry tool as HP lists for this procedure
- Static-safe work surface
L13680-001- Heat sink. Source: printed page 54.
Preparation
Save your work and shut the computer down through the operating system, unplug AC power and every external device, and work on a clean, grounded, ESD-protected surface while sorting each screw by its original location. Handle every cable by its connector and put each one back in its own place during reassembly.
Replacement
- Back off the four captive fasteners at the heat sink following the sequence stamped at the heat sink (1), (printed page 54).
- Thoroughly clean the compound from the surfaces of the main board component and the heat sink each time the heat sink is removed. (printed page 55).
- Fit the replacement part by working back through the printed removal steps (printed page 55).
Part numbers in our catalog
- HP heat sink L13680-001 (L13680-001)
Check each part page for its source and variant notes before ordering.
Manufacturer manual
HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-elitebook-830-g5-heat-sink-assembly-replacement-p54