Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.
Applies to
HP EliteBook 830 G5. Confirm the exact model on the service label before starting.
HP EliteBook 830 G5 Notebook PC touchpad button board replacement. HP prints this procedure on printed page 62 of its maintenance and service guide.
Tools and parts
- Screwdrivers and a non-marking pry tool as HP lists for this procedure
- Static-safe work surface
L19426-001- TouchPad button board. Source: printed page 62.
Preparation
Save your work and shut the computer down through the operating system, unplug AC power and every external device, and work on a clean, grounded, ESD-protected surface while sorting each screw by its original location. Handle every cable by its connector and put each one back in its own place during reassembly.
Replacement
- Detach the TouchPad button board lead from the ZIF connector on the TouchPad (1). (printed page 62).
- Take out the four Phillips M2.0x3.0 screws that hold the board to the computer, and then remove (printed page 62).
- Fit the replacement part by working back through the printed removal steps (printed page 62).
Parts this procedure uses
- HP TouchPad button board L19426-001 (L19426-001)
Manufacturer manual
HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-elitebook-830-g5-touchpad-button-board-replacement-p62