Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.
Applies to
HP EliteBook 830 G5. Confirm the exact model on the service label before starting.
HP EliteBook 830 G5 Notebook PC system board replacement. HP prints this procedure on printed page 67 of its maintenance and service guide.
tools and parts
- Screwdrivers and a non-marking pry tool as HP lists for this procedure
- Static-safe work surface
L13712-001- Intel i7-8650U processor. Source: printed page 67.L13711-001- Intel i7-8550U processor. Source: printed page 67.L13710-001- Intel i5-8350U processor. Source: printed page 67.L13709-001- Intel i5-8250U processor. Source: printed page 67.L32726-001- Intel i5-8130U processor. Source: printed page 67.L42314-001- Intel i7-7600U processor. Source: printed page 67.L42313-001- Intel i7-7500U processor. Source: printed page 67.L13708-001- Intel i5-7300U processor. Source: printed page 67.L13707-001- Intel i5-7200U processor. Source: printed page 67.
preparation
Save your work and shut the computer down through the operating system, unplug AC power and every external device, and work on a clean, grounded, ESD-protected surface while sorting each screw by its original location. Handle every cable by its connector and put each one back in its own place during reassembly.
replacement
- Position the computer upright (printed page 68).
- Take out the two Phillips M2.0×3.0 screws that hold the system board to the computer. (printed page 68).
- Close the computer and position it upside down. (printed page 68).
- Detach the following cables from the system board: (printed page 69).
- Take out the one Phillips M2.0×3.0 screw that holds the USB bracket to the computer, then remove (printed page 69).
- Take out the six Phillips M2.0×3.0 screws that hold the system board to the computer. (printed page 70).
- Lift the right side of the main board up at an angle (1). (printed page 70).
- Pull the system board up (printed page 70).
- Fit the replacement part by working back through the printed removal steps (printed page 70).
Part numbers in our catalog
- HP motherboard L13708-601 (L13708-601)
- HP motherboard L13710-601 (L13710-601)
- HP motherboard L13712-601 (L13712-601)
- HP NFC module L14385-001 (L14385-001)
- HP System board, Intel i7-8650U L13712-001 (L13712-001)
- HP System board, Intel i7-8550U L13711-001 (L13711-001)
- HP System board, Intel i5-8350U L13710-001 (L13710-001)
- HP System board, Intel i5-8250U L13709-001 (L13709-001)
- HP System board, Intel i3-8130U L32726-001 (L32726-001)
- HP System board, Intel i7-7600U L42314-001 (L42314-001)
- HP System board, Intel i7-7500U L42313-001 (L42313-001)
- HP System board, Intel i5-7300U L13708-001 (L13708-001)
- HP System board, Intel i5-7200U L13707-001 (L13707-001)
- HP RJ-45 board with bracket L19425-001 (L19425-001)
- HP NFC module L13682-001 (L13682-001)
Check each part page for its source and variant notes before ordering.
Manufacturer manual
HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-elitebook-830-g5-system-board-replacement-p67