Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.
Applies to
HP EliteBook 830 G5. Confirm the exact model on the service label before starting.
HP EliteBook 830 G5 Notebook PC smart card reader replacement. HP prints this procedure on printed page 64 of its maintenance and service guide.
Tools and parts
- Screwdrivers and a non-marking pry tool as HP lists for this procedure
- Static-safe work surface
L13690-001- Smart card reader. Source: printed page 64.L13678-001- Smart card reader cable (available in Cable Kit). Source: printed page 64.
Preparation
Save your work and shut the computer down through the operating system, unplug AC power and every external device, and work on a clean, grounded, ESD-protected surface while sorting each screw by its original location. Handle every cable by its connector and put each one back in its own place during reassembly.
Replacement
- Detach the system board cable from the plug on the smart card reader board (1). (printed page 64).
- Detach the TouchPad lead from the ZIF plug on the smart card reader board (2). (printed page 64).
- Take out the three Phillips M2.0x2.0 screws that hold the smart card reader to the computer. (printed page 64).
- Take out the smart card reader from the computer (4). (printed page 64).
- Fit the replacement part by working back through the printed removal steps (printed page 64).
Parts this procedure uses
- HP I/O board L13690-001 (L13690-001)
- HP cable L13678-001 (L13678-001)
Part numbers in our catalog
- HP I/O board L13687-001 (L13687-001)
Check each part page for its source and variant notes before ordering.
Manufacturer manual
HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-elitebook-830-g5-smart-card-reader-replacement-p64