Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.
Applies to
HP EliteBook 830 G5. Confirm the exact model on the service label before starting.
HP EliteBook 830 G5 Notebook PC touchpad replacement. HP prints this procedure on printed page 61 of its maintenance and service guide.
Tools and parts
- Screwdrivers and a non-marking pry tool as HP lists for this procedure
- Static-safe work surface
L13685-001- TouchPad for use in models without an NFC module. Source: printed page 61.L15394-001- TouchPad for use in models with an NFC module. Source: printed page 61.
Preparation
Save your work and shut the computer down through the operating system, unplug AC power and every external device, and work on a clean, grounded, ESD-protected surface while sorting each screw by its original location. Handle every cable by its connector and put each one back in its own place during reassembly.
Replacement
- Detach the card reader lead from the ZIF connector on the TouchPad (1). (printed page 61).
- Detach the TouchPad button board lead from the ZIF connector on the TouchPad (2). (printed page 61).
- Detach the NFC module lead from the ZIF plug on the NFC module (3). (printed page 61).
- Take out the four Phillips M2.0x2.0 screws that hold the TouchPad to the computer. (printed page 61).
- Lift the TouchPad out of the computer (5). (printed page 61).
- Fit the replacement part by working back through the printed removal steps (printed page 61).
Part numbers in our catalog
- HP touchpad L13685-001 (L13685-001)
- HP touchpad L15394-001 (L15394-001)
- HP TouchPad button board L19426-001 (L19426-001)
Check each part page for its source and variant notes before ordering.
Manufacturer manual
HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-elitebook-830-g5-touchpad-replacement-p61