Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.
Applies to
HP EliteBook 850 G5. Confirm the exact model on the service label before starting.
HP EliteBook 850 G5 Notebook PC nfc module replacement. HP prints this procedure on printed page 65 of its maintenance and service guide.
Tools and parts
- Screwdrivers and a non-marking pry tool as HP lists for this procedure
- Static-safe work surface
L14385-001- NFC module (includes antenna and TouchPad foam). Source: printed page 65.
Preparation
Save your work and shut the computer down through the operating system, unplug AC power and every external device, and work on a clean, grounded, ESD-protected surface while sorting each screw by its original location. Handle every cable by its connector and put each one back in its own place during reassembly.
Replacement
- Detach the system board cable and the NFC antenna from the ZIF connectors on the NFC (printed page 65).
- Use a tool to free the NFC unit from the adhesive securing it to the machine (3), and after that take the unit from the machine (4). (printed page 65).
- Fit the replacement part by working back through the printed removal steps (printed page 65).
Parts this procedure uses
- HP NFC module L14385-001 (L14385-001)
Manufacturer manual
HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-elitebook-850-g5-nfc-module-replacement-p65