Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.
Applies to
HP EliteBook 850 G5. Confirm the exact model on the service label before starting.
HP EliteBook 850 G5 Notebook PC speaker assembly replacement. HP prints this procedure on printed page 60 of its maintenance and service guide.
Tools and parts
- Screwdrivers and a non-marking pry tool as HP lists for this procedure
- Static-safe work surface
L14368-001- Speaker assembly (includes cable). Source: printed page 60.
Preparation
Save your work and shut the computer down through the operating system, unplug AC power and every external device, and work on a clean, grounded, ESD-protected surface while sorting each screw by its original location. Handle every cable by its connector and put each one back in its own place during reassembly.
Replacement
- Detach the speaker cable from the system board (1) (printed page 60).
- Take out the two Phillips M2.0×2.5 screws that hold the speaker to the computer. (printed page 60).
- Lift the speaker out of the computer (4). (printed page 60).
- Fit the replacement part by working back through the printed removal steps (printed page 60).
Part numbers in our catalog
- HP speaker kit L14368-001 (L14368-001)
Check each part page for its source and variant notes before ordering.
Manufacturer manual
HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-elitebook-850-g5-speaker-assembly-replacement-p60