Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.
Applies to
HP EliteBook x360 830 G5. Confirm the exact model on the service label before starting.
HP EliteBook x360 830 G5 Notebook PC bottom cover replacement. HP prints this procedure on printed page 31 of its maintenance and service guide, and the spare-part table for this part is on printed page 31.
Tools and parts
- Screwdrivers and a non-marking pry tool as HP lists for this procedure
- Static-safe work surface
L56448-001- Bottom cover for use in models without WWAN. Source: printed page 31.L56449-001- Bottom cover for use in models with WWAN. Source: printed page 31.
Preparation
Save your work and shut the computer down through the operating system, unplug AC power and every external device, and work on a clean, grounded, ESD-protected surface while sorting each screw by its original location. Handle every cable by its connector and put each one back in its own place during reassembly.
Replacement
- Back off the five captive Torx T5 fasteners that hold the bottom cover to the machine. (printed page 31).
- Seat a non-marking, non-conductive tool at the hinges and split the bottom cover from the machine (1). (printed page 31).
- Turn the upper (hinge side) of the cover up, and after that lift it off the machine (2). (printed page 32).
- Fit the replacement part by working back through the printed removal steps (printed page 32).
Part numbers in our catalog
- HP bottom cover (base enclosure) L56448-001 (L56448-001)
- HP bottom cover (models with WWAN) (L56449-001)
Check each part page for its source and variant notes before ordering.
Manufacturer manual
HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-elitebook-x360-830-g5-bottom-cover-replacement-p31