Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.
Applies to
HP EliteBook x360 830 G5. Confirm the exact model on the service label before starting.
HP EliteBook x360 830 G5 Notebook PC fan replacement. HP prints this procedure on printed page 50 of its maintenance and service guide.
Tools and parts
- Screwdrivers and a non-marking pry tool as HP lists for this procedure
- Static-safe work surface
L56444-001- Fan. Source: printed page 50.
Preparation
Save your work and shut the computer down through the operating system, unplug AC power and every external device, and work on a clean, grounded, ESD-protected surface while sorting each screw by its original location. Handle every cable by its connector and put each one back in its own place during reassembly.
Replacement
- Get the machine ready for taking apart (the Preparation for disassembly section is on page 42). (printed page 43).
- Take the bottom cover off (the Bottom cover section is on page 31). (printed page 33).
- Detach the battery (the Battery section is on page 33). (printed page 43).
- Detach the fan lead from the main board (1). (printed page 50).
- Take the three Phillips M2.5 × 3.5 fasteners (2) that hold the fan to the machine. (printed page 50).
- Take the fan from the machine (3). (printed page 50).
- Fit the replacement part by working back through the printed removal steps (printed page 50).
Part numbers in our catalog
- HP cooling fan L56444-001 (L56444-001)
Check each part page for its source and variant notes before ordering.
Manufacturer manual
HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-elitebook-x360-830-g5-fan-replacement-p50