HP EliteBook x360 830 G5 system board replacement

Step-by-step HP EliteBook x360 830 G5 system board replacement rewritten in our own words from HP's Maintenance and Service Guide, with page citations.

Part you needL56429-601HP motherboard L56429-601 for the HP EliteBook x360 830 G5
View part & buy links
On this page
  1. Applies to
  2. tools and parts
  3. preparation
  4. replacement
  5. Part numbers in our catalog
  6. Manufacturer manual
Source: steps rewritten in our own words (no more than 8 words in a row copied; part numbers, screw sizes and warnings kept as printed) from HP's Maintenance and Service Guide (PDF, printed pages 53–56). Not bench-tested. We have not performed this repair; keep HP's manual open for its illustrations. Scope restrictions below are part of the guide: do not apply it to other models, generations or configurations. Service manuals are written for trained technicians; work at your own risk.

Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.

Applies to

HP EliteBook x360 830 G5. Confirm the exact model on the service label before starting.

HP EliteBook x360 830 G5 Notebook PC system board replacement. HP prints this procedure on printed page 53 of its maintenance and service guide, and the spare-part table for this part is on printed page 53.

tools and parts

  • Non-marking, non-conductive pry tool, Magnetic drivers and Phillips P1 drivers
  • Static-safe work surface

preparation

HP prints its tools list and its handling and electrostatic-discharge cautions on printed page 25. Its preparation for disassembly is on printed page 30: power the unit down through the operating system, unplug the power cord and detach every external device before opening it. Work on a grounded, static-safe surface, keep screws grouped by the position they came from, and handle boards and modules by their edges.

replacement

  1. Detach following cables and SIM card holder from the system board: Webcam cable WLAN module antenna cables Speaker cable (printed page 53).
  2. Take out five Phillips M2.0 × 3.5 screws hold plastic I/O bracket to computer, and then remove the bracket. (printed page 54).
  3. Take out the Phillips M2.0 × 3.5 screw that holds the metal USB bracket to the computer, and the remove the bracket (4). (printed page 55).
  4. Take out the two Phillips M2.0 × 2.5 screws that hold the system board to the computer. (printed page 55).
  5. Lift right side of system board (1), and then pull system board to the right to remove it off the computer (2). (printed page 56).
  6. Put the system board back by repeating the printed removal moves in the opposite order (printed page 56).

Part numbers in our catalog

Check each part page for its source and variant notes before ordering.

Manufacturer manual

HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-elitebook-x360-830-g5-system-board-replacement-p53

Key facts

HP document part number
L56008-001
Model
HP EliteBook x360 830 G5
Release year
2019
Screen size
13.3"
Printed pages
53–56

Related