Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.
Applies to
HP EliteBook x360 830 G5. Confirm the exact model on the service label before starting.
HP EliteBook x360 830 G5 Notebook PC NFC module replacement. HP prints this procedure on printed page 46 of its maintenance and service guide.
Tools and parts
- Screwdrivers and a non-marking pry tool as HP lists for this procedure
- Static-safe work surface
L56453-001- NFC module (includes cables). Source: printed page 46.
Preparation
Save your work and shut the computer down through the operating system, unplug AC power and every external device, and work on a clean, grounded, ESD-protected surface while sorting each screw by its original location. Handle every cable by its connector and put each one back in its own place during reassembly.
Replacement
- Get the machine ready for taking apart (the Preparation for disassembly section is on page 42). (printed page 43).
- Take the bottom cover off (the Bottom cover section is on page 31). (printed page 33).
- Take the battery out (the Battery section is on page 33). (printed page 34).
- Detach the TouchPad lead out of the ZIF connector on the NFC module (1). (printed page 46).
- Detach the card reader board lead out of the ZIF connector on the NFC module (2). (printed page 46).
- Take the NFC module from the machine (3). (printed page 46).
- Fit the replacement part by working back through the printed removal steps (printed page 46).
Manufacturer manual
HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-elitebook-x360-830-g5-nfc-module-replacement-p46