HP EliteBook x360 830 G5 display assembly replacement

Step-by-step HP EliteBook x360 830 G5 display assembly replacement rewritten in our own words from HP's Maintenance and Service Guide, with page citations.

Part you needL56434-001HP 13.3-inch touch display assembly (220 nit) for the HP EliteBook x360 830 G5
View part & buy links
On this page
  1. Applies to
  2. Tools and parts
  3. Preparation
  4. Replacement
  5. Part numbers in our catalog
  6. Manufacturer manual
Source: steps rewritten in our own words (no more than 8 words in a row copied; part numbers, screw sizes and warnings kept as printed) from HP's Maintenance and Service Guide (PDF, printed pages 33–44). Not bench-tested. We have not performed this repair; keep HP's manual open for its illustrations. Scope restrictions below are part of the guide: do not apply it to other models, generations or configurations. Service manuals are written for trained technicians; work at your own risk.

Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.

Applies to

HP EliteBook x360 830 G5. Confirm the exact model on the service label before starting.

HP EliteBook x360 830 G5 Notebook PC display assembly replacement. HP prints this procedure on printed page 43 of its maintenance and service guide, and the spare-part table for this part is on printed page 43.

Tools and parts

  • Screwdrivers and a non-marking pry tool as HP lists for this procedure
  • Static-safe work surface
  • L56434-001 - Display assembly, 220 nits. Source: printed page 43.
  • L56435-001 - Display assembly, 220 nits, WWAN. Source: printed page 43.
  • L56436-001 - Display assembly, 400 nits. Source: printed page 43.
  • L56437-001 - Display assembly, 400 nits, WWAN. Source: printed page 43.

Preparation

Save your work and shut the computer down through the operating system, unplug AC power and every external device, and work on a clean, grounded, ESD-protected surface while sorting each screw by its original location. Handle every cable by its connector and put each one back in its own place during reassembly.

Replacement

  1. Get the machine ready for taking apart (the Preparation for disassembly section is on page 42). (printed page 43).
  2. Take the bottom cover off (the Bottom cover section is on page 31). (printed page 33).
  3. Detach the battery (the Battery section is on page 33). (printed page 43).
  4. Detach the webcam lead from the main board (1), and after that take the lead from the clip (2). (printed page 43).
  5. Detach the WWAN aerial leads from the WWAN module (3). (printed page 43).
  6. Detach the WLAN aerial leads from the WLAN module (4). (printed page 43).
  7. Detach the screen lead from the main board (5), and after that take the lead from the clips (6). (printed page 43).
  8. Open the screen to open the hinges (1). (printed page 44).
  9. Take the seven Phillips M2.5 × 5.0 fasteners (2) that hold the screen hinges to the machine. (printed page 44).
  10. Split the screen from the machine by pulling the screen up and away from the machine (3). (printed page 44).
  11. Fit the replacement part by working back through the printed removal steps (printed page 44).

Part numbers in our catalog

Check each part page for its source and variant notes before ordering.

Manufacturer manual

HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-elitebook-x360-830-g5-display-assembly-replacement-p43

Key facts

HP document part number
L56008-001
Model
HP EliteBook x360 830 G5
Release year
2019
Screen size
13.3"
Printed pages
33–44

Related