Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.
Applies to
HP EliteBook x360 830 G6. Confirm the exact model on the service label before starting.
HP EliteBook x360 830 G6 Notebook PC bottom cover replacement. HP prints this procedure on printed page 35 of its maintenance and service guide.
Tools and parts
- Screwdrivers and a non-marking pry tool as HP lists for this procedure
- Static-safe work surface
L56449-001- For use only on computer models with WWAN capability. Source: printed page 35.L56448-001- For use only on computer models without WWAN capability. Source: printed page 35.
Preparation
Save your work and shut the computer down through the operating system, unplug AC power and every external device, and work on a clean, grounded, ESD-protected surface while sorting each screw by its original location. Handle every cable by its connector and put each one back in its own place during reassembly.
Replacement
- Back off the five captive Torx T5 fasteners that hold the bottom cover to the machine. (printed page 35).
- Seat a non-marking, non-conductive tool at the hinges and split the bottom cover from the machine (1). (printed page 35).
- Turn the upper (hinge side) of the cover up, and after that lift it off the machine (2). (printed page 36).
- Fit the replacement part by working back through the printed removal steps (printed page 36).
Part numbers in our catalog
- HP bottom cover (base enclosure) L56448-001 (L56448-001)
- HP bottom cover (models with WWAN) (L56449-001)
Check each part page for its source and variant notes before ordering.
Manufacturer manual
HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-elitebook-x360-830-g6-bottom-cover-replacement-p35