Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.
Applies to
HP EliteBook x360 830 G6. Confirm the exact model on the service label before starting.
HP EliteBook x360 830 G6 Notebook PC nfc interface board replacement. HP prints this procedure on printed page 53 of its maintenance and service guide.
Tools and parts
- Screwdrivers and a non-marking pry tool as HP lists for this procedure
- Static-safe work surface
L59058-001- NFC interface board. Source: printed page 53.L56454-001- Card reader insert (for use on computer models without a card reader, available in the Plastics Kit, spare part number. Source: printed page 53.
Preparation
Save your work and shut the computer down through the operating system, unplug AC power and every external device, and work on a clean, grounded, ESD-protected surface while sorting each screw by its original location. Handle every cable by its connector and put each one back in its own place during reassembly.
Replacement
- Detach the NFC board lead from the NFC interface board (1). (printed page 53).
- Detach the TouchPad cable from carefully the NFC interface board (2). (printed page 53).
- Detach the NFC interface board lead from the system board (3). (printed page 53).
- Take out the NFC interface board from the computer (4). (printed page 53).
- Fit the replacement part by working back through the printed removal steps (printed page 53).
Part numbers in our catalog
- HP power button board (with holder and cable) (L56451-001)
- HP I/O board L59058-001 (L59058-001)
Check each part page for its source and variant notes before ordering.
Manufacturer manual
HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-elitebook-x360-830-g6-nfc-interface-board-replacement-p53