Labels: DOCUMENTED = taken from HP's manual; PROPOSED = our own joining or ordering of HP's directions, not an HP instruction; UNPERFORMED = a suggested check that has not been carried out.
Applies to
HP EliteBook x360 830 G6. Confirm the exact model on the service label before starting.
HP EliteBook x360 830 G6 Notebook PC card reader board replacement. HP prints this procedure on printed page 52 of its maintenance and service guide.
Tools and parts
- Screwdrivers and a non-marking pry tool as HP lists for this procedure
- Static-safe work surface
L56452-001- Card reader board (includes cable). Source: printed page 52.
Preparation
Save your work and shut the computer down through the operating system, unplug AC power and every external device, and work on a clean, grounded, ESD-protected surface while sorting each screw by its original location. Handle every cable by its connector and put each one back in its own place during reassembly.
Replacement
- (NFC models only) Detach the NFC board lead from the card reader board (1). (printed page 52).
- Detach the TouchPad cable from carefully the card reader board (2). (printed page 52).
- Detach the card reader board cable off the system board (3). (printed page 52).
- Take out the three Phillips M2.0 × 2.0 screws that holds the board to the computer. (printed page 52).
- Take out the card reader board from the computer (5). (printed page 52).
- Fit the replacement part by working back through the printed removal steps (printed page 52).
Parts this procedure uses
- HP card reader board (L56452-001)
Part numbers in our catalog
- HP power button board (with holder and cable) (L56451-001)
- HP I/O board L59058-001 (L59058-001)
Check each part page for its source and variant notes before ordering.
Manufacturer manual
HP Maintenance and Service Guide (PDF, HP). Machine-readable copy: /api/guides/hp-elitebook-x360-830-g6-card-reader-board-replacement-p52